Step by Step Installation of Server 2008

Install windows 2008  
Before Installation of windows Server 2008 You need Following Hardware Requirements:

Component	Requirement
Processor	• Minimum: 1GHz (x86 processor) or 1.4GHz (x64 processor) • Recommended: 2GHz or faster Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-based Systems
Memory	• Minimum: 512MB RAM • Recommended: 2GB RAM or greater • Maximum (32-bit systems): 4GB (Standard) or 64GB (Enterprise and Datacenter) • Maximum (64-bit systems): 32GB (Standard) or 2TB (Enterprise, Datacenter and Itanium-based Systems)
Available Disk Space	• Minimum: 10GB • Recommended: 40GB or greater Note: Computers with more than 16GB of RAM will require more disk space for paging, hibernation, and dump files
Drive	DVD-ROM drive
Display and Peripherals	• Super VGA (800 x 600) or higher-resolution monitor • Keyboard • Microsoft Mouse or compatible pointing

Step-1

 Insert the appropriate Windows Server 2008 installation media into your DVD drive. If you don’t have an installation DVD for Windows Server 2008, you can download(Trial Version.) one for free from https://www.microsoft.com/en-us/download/details.aspx?id=5842

 Step-2

 Press F2,F8 or Del key (any one as per ...) to access the BIOS Setup Utility.The BIOS  Setup screen appears.

  Step-3

 select the Boot menu.The Boot Settings menu appears.

In the Boot Setting menu,use the down arrow key to Select Boot Device Priority,the press Enter. Boot Device Priority menu appears listing the order of the known bootable devices.Select CD/ROM as first Priority from the list and Press F10 key To Save Your Setting Select OK and press Enter.

• The boot device order listed on your screen might differ from the device 

Step-4
 Reboot the computer.

Step-5

Select Language to Installation and Other Regional Option and Next.

Step-6

Click on Install Now Button

Step-7

Enter your Product ID in the next window, and if you want to automatically activate Windows the moment the installation finishes, click Next.

If you do not have the Product ID available right now, you can leave the box empty, and click Next. You will need to provide the Product ID later,

Step-8

 All the versions of Windows Server 2008 R2  listed .choose the option  to install and Click Next

Step-9
check mark I accept the license terms checkbox on the license terms page and click Next.

Step-10
Select Which type of installation do you want? Here I have Select Custom Option.

Step-11
Select Drive for  where you want to Installation  server 2008 and click Next

Step-12
Installation Starting.........

Step-13
During first log on the installer will ask you to create a password. Click OK when you see the display as it appears below.

Step-14
Enter Password 

Step-15
The password has been changed. Click OK

Thanking You....To Configuration of Domain Controller(DC) go to other post..............